The special line for craftsmen and industrial applications. Due to the fact that different materials impose different demands, DRONCO produces discs especially matching the respective material. Special types of corundum and bonds are combined to suit the task in hand. This optimises performance, extends service life, increases efficiency and reduces cutting time.

• manufactured according to EN 12413
• complies to oSa regulations
• of course: Made in Germany

  Professional use needs for every application the right disc. Therefore abrasive grits and bonds match exactly the material – this increases the performance and minimises the working time.

• very good lifetime
• very „agressive“ disc
• very good removal rate
• very good economic efficiency

  These brushes behave less aggressively and are therefore predestined for finer applications where care must be taken to prevent a removal rate too high, e.g. removal of rust from stair railings. They are characterised by a long service life and high stability with an outstanding price/performance ratio.

  Ideal for aggressive applications under most adverse conditions, e.g. removing wall paint from very rough-surfaced natural stone. They are characterised by a high removal rate and extreme stability.

  Ideal for aggressive applications under most adverse conditions, e.g. removing wall paint from very rough-surfaced natural stone. They are characterised by a high removal rate and extreme stability.

  These brushes behave less aggressively and are therefore predestined for finer applications where care must be taken to prevent a removal rate too high, e.g. removal of rust from stair railings. They are characterised by a long service life and high stabi

CLEAR MULTI-PURPOSE ENHANCER, SUBRICANT AND PROTECTANT.

Concentrated formula provides thin, durable film that revives, lubricates & protects.

 Will not mark or stain.

 Ideal for use on most surfaces.

 Reduces friction and galling.

  The special line for craftsmen and industrial applications. Due to the fact that different materials impose different demands, DRONCO produces discs especially matching the respective material. Special types of corundum and bonds are combined to suit the task in hand. This optimises performance, extends service life, increases efficiency and reduces cutting time.

• manufactured according to EN 12413
• complies to oSa regulations
• of course: Made in Germany

 GAVALNIC, RUST, PROTECTION.

CRC  Zinc  It  is  a  single  component  Zinc  rich  compound with  the  special  epoxy  binder  and  contains  over  90% of  highest  purity  Zinc  in  the  dried  film.  It  fuses  directly to  a  clean  iron  or  steel  surface  through  electrochemical action and presents a hard, single-time protection against corrosion for many years. It is not a paint. The sacrificial coating actively fights rust and corrosion creepage with a flexible, continuous film.CRC Zinc It actually offers itself as a cathodic protection against  corrosion.  The  zinc  becomes  the  anode  from which positive electric current is self-generated and flows to the cathode… or base metal. When applied to iron or steel – even in the presence of moisture – the zinc in CRC Zinc It becomes the perfect anode. Corrosion attacks the anodic (Zinc) covering 

 LONG TERM PROTECTION FOR METAL SURFACES

CRC Soft Seals firm, waxy film is highly resistant to humidity and salt spray, never become brittle and will not craze. It seal out moisture and corrosive contaminants by forming a dry, transparent, amber film which is highly resistant to humidity, salt water and salt spray and is used for air conditioning equipment, cable end sealer, dies, moulds, jigs, to protect equipment, tooling, in-transit and stored equipment, airport and aircraft maintenance.

PRECISION ELECTRONIC CLEANING SOLVENT.

LEAVES NO RESIDUE LOW IN TOXICITY.

CRC  CO  Contact  Cleaner’s  plastic  safe  formula  is  a technically  proven,  stable,  inert  high  purity  cleaning solvent.  Non-corrosive,  non-staining,  rapid  complete evaporation  –  contains  no  lubricants.  Removes  light contaminants,  dust,  lint,  atmospheric  oils,  finger  prints, moisture  from  precision  electrical/electronic  equipment where  lower-flashpoint  solvents  may  be  used.  Leaves no  residue  to  increased  resistance.  Use  as  a  touch-up supplement for vapour degreasing. Does not contain CFC 113 or Methyl Chloroform. Deactivate equipment before use. Flammable formulation. Ventilate after use.